Black Micro Irrigation Pipe (Tube), 4mm/6mm - 50m

Product Information

for connection to the supply pipe, the base and 200mm dia. 650mm long PVC guard tube and an optional cast iron frame and cover. The first thing to do is set the compass to the scale of 3 metres for your drawing. This represents the spray radius of the micro sprays (for 1:100 scale, this would be 2cm). Then proceed to draw either quarter-circles (90° microjets), semi-circles (180° microjets) or full-circles (360° microjets) to best cover your planted areas. You can reduce the radius if required, but remember that you will need to choose vari-flow microjets to reduce the spray radius when you come to install them. Overlap the spray patterns to avoid dry patches. Our range of sprinklers is vast with Hunter Sprinklers, Orbit sprinklers, rolland sprinklers, Naan Sprinklers, Rainbird sprinklers, Toro sprinklers as well as specialist items such as the Manurain sprinkler for slurry and sewage. These sprinklers can be used for Irrigation, Cooling, Propagation, Dust suppression, damping down, and many other uses. It is also possible to insert the micro spray heads directly into the main supply pipe by simply punching a hole using the irrigation hole punch, and then inserting the inlet of the micro spray into the punched hole. With a scale map of your garden, draw a path from your water source past all the micro sprays you have planned. This path can branch off in different directions (using tee connectors) and do 90° turns around obstacles (using elbows). The idea of a watering system is to be hidden, so consider the best route for the pipework to follow to ensure it is out of sight. This could be underground (up to 5cm), under mulch, hidden behind bushes, or neatly pinned to a wall or fence.

For many customers and contractors it is preferable to undertake a full or partial installation of a system themselves. We are please to offer a service of design and supply or partial installation for most types of irrigation systems. These systems would be designed to provide the same quality of Irrigation system we would provide in one of our own installations be it a private garden Irrigation system or a Bowling green irrigation system. For corners of garden beds, use the 90° (quarter-circle) Microjet Sprays to ensure we don't overspray onto walls, fences or paths. 90° Microjet Sprays are used in conjunction with 180° Microjet Sprays. Downspray Wire Stake with Shut-Off - These are pre-assembled to save installation time, with an extended length of micro pipe already fitted, a tube adaptor, and a shut-off clip to stop flow when a tree is removed.

Cookie Control

Tricoflex hose has been used extensively in Horticulture, Sports and Amenity industries for many years. TOP TIP: If you pierce a hole in the wrong place, use a micro blanking plug (aka Goof Plug) to close and seal the hole.

Anchor and fix the supply pipe in place using pipe stakes and wall clips. The ideal placement of stakes and wall clips for the main supply pipe is one every 50-150cm. Water Timer - The ideal timer for this project would be the Claber Dual Select, as it allows the irrigation system to be split into two zones with just one computer to control both lines. Lay the main supply pipe around the area to be watered. The tube will be more manageable if warmed in the sunshine before use. Initially, position it with weights until it relaxes. To accurately determine how much supply pipe we need for our irrigation system, we can draw a route the pipe will take from the water source to your irrigation system's endpoint(s) on the map we previously created.To make sure your micro-spray system is performing at its best year after year, we should take some steps before the winter months set in and any freezing conditions.

Pipe Stakes and Wall Clips - Available for 19mm, 13mm and 4mm pipes, this secures the pipe in place. Use the stakes to secure the pipe to soil or wall clips to secure the pipe to walls, fences and posts. Pipe Stakes and Wall Clips - Available for 19mm, 13mm and 4mm pipe, stakes and wall clips are used to secure the tube in place. Use the stakes to secure the pipe to soil or wall clips to secure the pipe to walls and fences.Elbow, tee connectors, stop ends, etc. - Based on the plan's requirements, choose 13mm connectors to guide the pipe around the nursery and terminate runs. selling composts and fertilizers, Horticultural sundries and tools.Keen gardeners are also welcome. TOP TIP: Position sprays placed along edges or in corners 2-5 cm from the edge to prevent overspray onto paths, fences and walls. Connect the micro supply pipe to the main supply pipe by punching a hole in the main line with an irrigation hole punch and then inserting a tube adaptor into that hole. The tube adaptor creates an outlet for the micro supply pipe to connect to. Connect the other end of the micro supply pipe to the inlet of the micro spray stake.