About this deal
For J9263A, J9264A: K.14.03 (for J9054B/C 1990-3613); K.15.08.0007 (for J9054C 1990-4112 and 1990-4483) RJ-45 10/100/1000 連接埠 (IEEE 802.3 Type 10Base-T;IEEE 802.3u Type 100Base-Tx;IEEE 802.3ab 1000Base-T Gigabit 乙太網路) 或用作 SFP 插槽 (使用 SFP 收發器) 連接埠
RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only RJ-45 自動感測 10/100/1000 連接埠 (IEEE 802.3 Type 10BASE-T、IEEE 802.3u Type 100BASE-TX、IEEE 802.3ab Type 1000BASE-T);媒體類型:Auto-MDIX;雙工:10BASE-T/100BASE-TX:半雙工或全雙工;1000BASE-T:僅全雙工 RJ-45 自動感測 10/100/1000 PoE+ 連接埠 (IEEE 802.3 Type 10BASE-T、IEEE 802.3u Type 100BASE-TX、IEEE 802.3ab Type 1000BASE-T、IEEE 802.3at PoE+);媒體類型:Auto-MDIX;雙工:10BASE-T/100BASE-TX:半雙工或全雙工;1000BASE-T:僅全雙工For use in the SFP+ ports of the JL075A 3810M switch. Also used in any 3810M switch with a JL083A Aruba 3810M/2930M 4SFP+ MACsec Module installed.
For J9451A: K.14.24 (for J9054B/C 1990-3613); K.15.08.0007 (for J9054C 1990-4112 and 1990-4483) J9054D: K.15.08.0007 Not supported for use in the following 3800 models: J9573A, J9574A, J9575A, and J9576A. The SFP+ ports do not support 100M operation. J8177C/J8177D will have a delay (~15 secs) before link up or down is properly displayed when a cable is inserted or removed.For use in the SFP ports of the 2530 Series Switches. (The J9853A, J9854A, J9855A, and J9856A models have 1G/10G SFP+ ports that do not support these 100Mbps transceiver modules.) RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX); Duplex: half or full autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only