Hoover Whirlwind Evo WRE06, Upright, Grey, Red, 500 W

Product Information

The combined crevice and brush tool is becoming a very familiar feature in budget cleaners; this is its fourth appearance on the TrustedReviews test bench – across four different brands! Wash both filterparts and the dust containerin warm water and please ensure it is all thoroughly dry before putting it back together. We do recommend that you replace the filters regularly so if washing them does not improve the cleaners performance it may be a good idea to purchase some new ones. Hepa filters trap microscopic dust particles and the best way to clean the filter is to wash it in warm water.

HOOVER WHIRLWIND EVO USER MANUAL Pdf Download | ManualsLib HOOVER WHIRLWIND EVO USER MANUAL Pdf Download | ManualsLib

If the suction power seems to be reduced and the product is not picking up it may be because the filters in the cleaner need to be cleaned. Dust the filters clean with a soft brush or for best results wash them in warm water but please allow them to dry thoroughly before putting them back. It is a hepa filter which means it will trap microscopic dust particles and itwill need to be regularly cleaned and replaced once a year to keep the suction strength of the cleaner good.Once all the parts are dry, reassemble the dust box and fit it back onto the cleaner, its now ready for use. There are two filters fitted to the cleaner and keeping them clean will ensure that it has great suction and picks up efficiently. Once the container is empty put your hand up inside the container, grasp the bottom of the filter and twist anti clockwise to release the filter and remove from the bottom of the dust container.

Hoover Advice Centre No suction and not picking up - Hoover Advice Centre

Brushes do wear down in time and they become soft of loose their shape the product will not pick up as good as it used to. For example you’d expect a much higher quality product from a brand known for providing excellent quality than you would from an unknown or even a budget brand. Now look down and inspect the lower end of the hose - the belt cover plate can also be removed and a coin dropped through this small hose section.All these parts may be washed in warm water to help clean them but please make sure everything is dry before putting it all back together. Washing the filter cone regularly keeps your cleaner working efficiently but please make sure everything has dried thoroughly before you pop it all back together. Doing this on a regular basis will keep the vacuum cleaner working well and with a good suction power. For best results wash the filter and the dust containerin warm water and allow to dry thoroughly before re fitting to the product. The mid way setting will switch the cleaner on but only give suction, push it down to the bottom setting to switch on the brushes.

Whirlwind Vacuum Cleaner Help and Advice from Hoover Whirlwind Vacuum Cleaner Help and Advice from Hoover

Start by unclipping the dust container from the cleaner by pressing down the release catch and lifting the bin off.There are two filters inside the dust box of your cleaner and if you are finding that there is not much suction this may be down to the filters being blocked or require replacement. We recommend that the dust container is emptied regularly or if it appears to be more than 2/3 full.

Hoover Whirlwind SE71 Review | Trusted Reviews

Please make sure they have thoroughly dried before popping them back in, this can take up to 24 hours. Switch the cleaner on and press the brush control switch to 'on' - Push the buttonindicated in the picturewith the green arrow. Hoover recommend that new filters are fitted if no improvement is noticed after cleaning them and at least one per year.To keep your cleaner working effectively and producing the best possible suction it is important to regularly empty the dust container and keep the filters clean. During testing, we filled it way past this level (as most people will) without major loss of suction, so take that Max level as a guide.